Part Number Hot Search : 
FN1198 A5800934 CXXXX 258652 CXD2540Q 6143A MKW5030 2SK1825
Product Description
Full Text Search
 

To Download OPB100Z Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Optical Emitter and Sensor Pair
OPB100Z, OPB100EZ, OPB100SZ
Features:
* * * * * *
890 nm infrared LED emitter Silicon phototransistor sensor Snap-in mounting Variable sensing distance over 36" (91.4 cm) Low profile package 24" (61.0 cm) wire leads
Description:
The OPB100 series consists of an infrared LED (OPB100EZ) and phototransistor (OPB100SZ) in separate plastic housings. The low cost, snap-in design requires no screws or other mounting hardware for ease of installation. The emitter and sensor are not apertured, which allows separation distances in excess of 36" (91.4 cm) without concern for precise alignment. The front side clip allows mounting of the product to any 0.062" (1.57 mm) thick material. This product is designed for general switching and low-speed data communications applications.
Applications:
* * * * *
Non-contact reflective object Non-contact interruptive sensing Assembly line automation Machine automation Machine safety Emitter (LED)
Part Number OPB100Z OPB100-EZ OPB100-SZ
Ordering Information LED Peak Wavelength Sensor Lead Length / Spacing
880 nm
Transistor
24" / 26 AWG Wire
Phototransistor
Color/Pin
Red-1 Black-2 White-3 Green-4
Description
Anode Cathode Collector Emitter
Red
White
SNAP BODY 26 AWG UL Rated
Symbolize Cover
Black
Green
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.1 01/06 Page 1 of 3
OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Optical Emitter and Sensor Pair
OPB100Z, OPB100EZ, OPB100SZ
Absolute Maximum Ratings (TA=25C unless otherwise noted)
Storage Temperature Range Operating Temperature Range(1) Input LED (OP298 for additional information) Forward DC Current Peak Forward Current (1 s pulse width, 300 pps) Reverse DC Voltage Power Dissipation
(2)
-40o C to +85o C -40o C to +80o C
100 mA 1A 2V 142 mW
Output Phototransistor (OP598 for additional information) Collector-Emitter Voltage Emitter-Collector Voltage Collector DC Current Power Dissipation
(3)
30 V 5V 50 mA 250 mW
Electrical Characteristics (TA = 25C unless otherwise noted -- for reference only)
SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS
Input Diode (See OP298 for additional information -- for reference only) VF IR qHP EE (APT) Forward Voltage Reverse Current Emission Angle at Half Power Points Aperture Radiant Incidence 2.4 25 1.7 15 V A Degree IF = 20 mA VR= 10 V IF = 20 mA
IF = 100 mA mW/cm2 Distance = 1.43" (3.63 cm) Aperture = 0.25" (6.35 mm)
Output Phototransistor (See OP598 for additional information -- for reference only) V(BR)CEO V(BR)ECO ICEO VCE(SAT) IC(ON) Collector-Emitter Breakdown Voltage Emitter-Collector Breakdown Voltage Collector Dark Current Collector-Emitter Saturation Voltage On-State Collector Current 30 5 5 100 0.4 V V nA V mA IC = 1 mA, EE = 0mw/cm2 (no light) IC = 100 A, EE = 0mw/cm2 (no light) VCE = 10V, IF = 0, EE = 0 mw/cm2 (no light) IC = 400 A, EE = 1.7 mw/cm2 VCE = 5 V, EE = 1.7 mw/cm2
Notes: 1. Derate linearly 3.33mW/C above 25C. 2. All parameters measured using pulse technique. 3. Derate linearly 1.43mW/C above 25C.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A .1 01/06 Page 2 of 3 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Optical Emitter and Sensor Pair
OPB100Z, OPB100EZ, OPB100SZ
Output Current vs. Distance
100 IF=20 mA IF=50 mA
Typical Output Current (mA)
10
1
0.1
0.01 1 2 3 4 5 6 7 8 9 10 11 12
Distance (inches)
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.1 01/06 Page 3 of 3


▲Up To Search▲   

 
Price & Availability of OPB100Z

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X